This is a rechargeable Honeywell 3.85V 4850mAh BAT-EDA40K Battery . High quality and long lifetime, this BAT-EDA40K battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for Honeywell BAT-EDA40K Scanner have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for Honeywell BAT-EDA40K has been tested and validated on Honeywell systems to ensure the safety for your Honeywell BAT-EDA40K. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

BAT-EDA40K Replacement Honeywell BAT-EDA40K 3.85V 4850mAh Battery. Buy cheap Honeywell BAT-EDA40K Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for Honeywell BAT-EDA40K) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original Honeywell BAT-EDA40K battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

Product Description:

Type :Li-ion
Brand : Honeywell
Voltage : 3.85V
Capacity :4850mAh

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan – thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

BAT-EDA40K

Compatibile con i seguenti apparecchi :

for Honeywell BAT-EDA40K

How to care for your BAT-EDA40K battery.

This is the Replacement Honeywell BAT-EDA40K Battery, You can extend the life of your BAT-EDA40K battery significantly through the proper care and handling of your battery.

• Any new BAT-EDA40K battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Scanners plugged in after they have been turned off so that the battery has a full charge the next time you use your Scanner. It is probably fully charged within 5 hours.
• A brand new BAT-EDA40K Scanner battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
• Run on battery power without the AC adapter cord at least once a week to keep the BAT-EDA40K battery cells active and at their peak potential. When your Scanner is plugged into the power adapter the battery goes to ‘standby mode’ while your Scanner runs directly on electricity from the wall outlet.
• Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
• If your BAT-EDA40K battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
• Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the BAT-EDA40K battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Scanners, even the earliest models.
• Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your BAT-EDA40K battery.

How can I extend your battery run time?

You can extend your BAT-EDA40K battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

• Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
• Turn off your wireless finder if you are not using the internet.
• Remove any devices plugged into your USB ports or other ports.
• Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
• Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
• Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

• 4040mAh/14.6Wh 3.6V Honeywell Intermec 318-055-001
• 5000mAh/18.5Wh 3.7V Dolphin 99EX Honeywell 99GX
• 2600mAh 3.75V Honeywell 1202/1452/1902/1911/1981/3820
• 4600mAh 3.7V/4.2V Honeywell Intermec CN50 CN51

This is a rechargeable Honeywell 7.2V 2500mAh 550052-000 Battery . High quality and long lifetime, this 550052-000 battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for Honeywell 550052-000 Printer have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for Honeywell 550052-000 has been tested and validated on Honeywell systems to ensure the safety for your Honeywell RP2 Mobile Printer. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

550052-000 Replacement Honeywell 550052-000 7.2V 2500mAh Battery. Buy cheap Honeywell 550052-000 Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for Honeywell 550052-000) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original Honeywell 550052-000 battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

Product Description:

Type :Li-ion
Brand : Honeywell
Voltage : 7.2V
Capacity :2500mAh

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan – thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

550052-000

Compatibile con i seguenti apparecchi :

for Honeywell RP2 Mobile Printer

How to care for your 550052-000 battery.

This is the Replacement Honeywell 550052-000 Battery, You can extend the life of your 550052-000 battery significantly through the proper care and handling of your battery.

• Any new 550052-000 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Printers plugged in after they have been turned off so that the battery has a full charge the next time you use your Printer. It is probably fully charged within 5 hours.
• A brand new 550052-000 Printer battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
• Run on battery power without the AC adapter cord at least once a week to keep the 550052-000 battery cells active and at their peak potential. When your Printer is plugged into the power adapter the battery goes to ‘standby mode’ while your Printer runs directly on electricity from the wall outlet.
• Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
• If your 550052-000 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
• Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the 550052-000 battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Printers, even the earliest models.
• Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your 550052-000 battery.

How can I extend your battery run time?

You can extend your 550052-000 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

• Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
• Turn off your wireless finder if you are not using the internet.
• Remove any devices plugged into your USB ports or other ports.
• Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
• Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
• Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

• 1.62Ah 7.4V Honeywell Intermec PR2 PR3
• 5200mAh 7.2V Honeywell RP4
• 2500mAh 7.2V Honeywell RP2 Mobile Printer

This is a rechargeable Honeywell 3.7V 2400mAh BAT-SCN05 Battery . High quality and long lifetime, this BAT-SCN05 battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for Honeywell BAT-SCN05 Scanner have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for Honeywell BAT-SCN05 has been tested and validated on Honeywell systems to ensure the safety for your Honeywell Xenon 1952G 1902GHD. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

BAT-SCN05 Replacement Honeywell BAT-SCN05 3.7V 2400mAh Battery. Buy cheap Honeywell BAT-SCN05 Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for Honeywell BAT-SCN05) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original Honeywell BAT-SCN05 battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

Product Description:

Type :Li-ion
Brand : Honeywell
Voltage : 3.7V
Capacity :2400mAh

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan – thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

BAT-SCN05

Compatibile con i seguenti apparecchi :

for Honeywell Xenon 1952G 1902GHD
for Honeywell Granit 1991iSR 1990iSR
for Honeywell 1952GRS-2-31886 (REV B)

How to care for your BAT-SCN05 battery.

This is the Replacement Honeywell BAT-SCN05 Battery, You can extend the life of your BAT-SCN05 battery significantly through the proper care and handling of your battery.

• Any new BAT-SCN05 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Scanners plugged in after they have been turned off so that the battery has a full charge the next time you use your Scanner. It is probably fully charged within 5 hours.
• A brand new BAT-SCN05 Scanner battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
• Run on battery power without the AC adapter cord at least once a week to keep the BAT-SCN05 battery cells active and at their peak potential. When your Scanner is plugged into the power adapter the battery goes to ‘standby mode’ while your Scanner runs directly on electricity from the wall outlet.
• Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
• If your BAT-SCN05 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
• Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the BAT-SCN05 battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Scanners, even the earliest models.
• Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your BAT-SCN05 battery.

How can I extend your battery run time?

You can extend your BAT-SCN05 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

• Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
• Turn off your wireless finder if you are not using the internet.
• Remove any devices plugged into your USB ports or other ports.
• Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
• Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
• Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

• 4040mAh/14.6Wh 3.6V Honeywell Intermec 318-055-001
• 5000mAh/18.5Wh 3.7V Dolphin 99EX Honeywell 99GX
• 2400mah/9Wh 3.75V Honeywell 1202/1452/1902/1911/1981/3820
• 4600mAh 3.7V/4.2V Honeywell Intermec CN50 CN51

This is a rechargeable Honeywell 3.7V 1150mAh BAT-MOB00 Battery . High quality and long lifetime, this BAT-MOB00 battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for Honeywell BAT-MOB00 Scanner have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for Honeywell BAT-MOB00 has been tested and validated on Honeywell systems to ensure the safety for your Honeywell SL22 SL42. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

BAT-MOB00 Replacement Honeywell BAT-MOB00 3.7V 1150mAh Battery. Buy cheap Honeywell BAT-MOB00 Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for Honeywell BAT-MOB00) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original Honeywell BAT-MOB00 battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

Product Description:

Type :Li-ion
Brand : Honeywell
Voltage : 3.7V
Capacity :1150mAh

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan – thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

BAT-MOB00

Compatibile con i seguenti apparecchi :

Honeywell SL22 SL42

How to care for your BAT-MOB00 battery.

This is the Replacement Honeywell BAT-MOB00 Battery, You can extend the life of your BAT-MOB00 battery significantly through the proper care and handling of your battery.

• Any new BAT-MOB00 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Scanners plugged in after they have been turned off so that the battery has a full charge the next time you use your Scanner. It is probably fully charged within 5 hours.
• A brand new BAT-MOB00 Scanner battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
• Run on battery power without the AC adapter cord at least once a week to keep the BAT-MOB00 battery cells active and at their peak potential. When your Scanner is plugged into the power adapter the battery goes to ‘standby mode’ while your Scanner runs directly on electricity from the wall outlet.
• Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
• If your BAT-MOB00 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
• Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the BAT-MOB00 battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Scanners, even the earliest models.
• Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your BAT-MOB00 battery.

How can I extend your battery run time?

You can extend your BAT-MOB00 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

• Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
• Turn off your wireless finder if you are not using the internet.
• Remove any devices plugged into your USB ports or other ports.
• Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
• Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
• Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

• 4040mAh/14.6Wh 3.6V Honeywell Intermec 318-055-001
• 5000mAh/18.5Wh 3.7V Dolphin 99EX Honeywell 99GX
• 2400mah/9Wh 3.75V Honeywell 1202/1452/1902/1911/1981/3820
• 4600mAh 3.7V/4.2V Honeywell Intermec CN50 CN51

This is a rechargeable Honeywell 7.4V 1.62Ah 318-049-001 Battery . High quality and long lifetime, this 318-049-001 battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for Honeywell 318-049-001 Printer have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for Honeywell 318-049-001 has been tested and validated on Honeywell systems to ensure the safety for your Honeywell Intermec PR2 PR3. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

318-049-001 Replacement Honeywell 318-049-001 7.4V 1.62Ah Battery. Buy cheap Honeywell 318-049-001 Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for Honeywell 318-049-001) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original Honeywell 318-049-001 battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

Product Description:

Type :Li-ion
Brand : Honeywell
Voltage : 7.4V
Capacity :1.62Ah

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan – thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

1013AB01

318-049-001

Compatibile con i seguenti apparecchi :

Honeywell Intermec PR2 PR3

How to care for your 318-049-001 battery.

This is the Replacement Honeywell 318-049-001 Battery, You can extend the life of your 318-049-001 battery significantly through the proper care and handling of your battery.

• Any new 318-049-001 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Printers plugged in after they have been turned off so that the battery has a full charge the next time you use your Printer. It is probably fully charged within 5 hours.
• A brand new 318-049-001 Printer battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
• Run on battery power without the AC adapter cord at least once a week to keep the 318-049-001 battery cells active and at their peak potential. When your Printer is plugged into the power adapter the battery goes to ‘standby mode’ while your Printer runs directly on electricity from the wall outlet.
• Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
• If your 318-049-001 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
• Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the 318-049-001 battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Printers, even the earliest models.
• Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your 318-049-001 battery.

How can I extend your battery run time?

You can extend your 318-049-001 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

• Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
• Turn off your wireless finder if you are not using the internet.
• Remove any devices plugged into your USB ports or other ports.
• Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
• Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
• Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

• 1.62Ah 7.4V Honeywell Intermec PR2 PR3
• 5200mAh 7.2V Honeywell RP4

This is a rechargeable Honeywell 3.7V 4.2V 1150mAh 4.26Wh BAT-SCN03 Battery . High quality and long lifetime, this BAT-SCN03 battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for Honeywell BAT-SCN03 Scanner have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for Honeywell BAT-SCN03 has been tested and validated on Honeywell systems to ensure the safety for your Honeywell 8680i 50139400-001. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

BAT-SCN03 Replacement Honeywell BAT-SCN03 3.7V 4.2V 1150mAh 4.26Wh Battery. Buy cheap Honeywell BAT-SCN03 Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for Honeywell BAT-SCN03) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original Honeywell BAT-SCN03 battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

Product Description:

Type :Li-ion
Brand : Honeywell
Voltage : 3.7V 4.2V
Capacity :1150mAh 4.26Wh

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan – thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

BAT-SCN03

Compatibile con i seguenti apparecchi :

Honeywell 8680i 50139400-001

How to care for your BAT-SCN03 battery.

This is the Replacement Honeywell BAT-SCN03 Battery, You can extend the life of your BAT-SCN03 battery significantly through the proper care and handling of your battery.

• Any new BAT-SCN03 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Scanners plugged in after they have been turned off so that the battery has a full charge the next time you use your Scanner. It is probably fully charged within 5 hours.
• A brand new BAT-SCN03 Scanner battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
• Run on battery power without the AC adapter cord at least once a week to keep the BAT-SCN03 battery cells active and at their peak potential. When your Scanner is plugged into the power adapter the battery goes to ‘standby mode’ while your Scanner runs directly on electricity from the wall outlet.
• Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
• If your BAT-SCN03 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
• Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the BAT-SCN03 battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Scanners, even the earliest models.
• Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your BAT-SCN03 battery.

How can I extend your battery run time?

You can extend your BAT-SCN03 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

• Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
• Turn off your wireless finder if you are not using the internet.
• Remove any devices plugged into your USB ports or other ports.
• Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
• Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
• Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

• 4040mAh/14.6Wh 3.6V Honeywell Intermec 318-055-001
• 5000mAh/18.5Wh 3.7V Dolphin 99EX Honeywell 99GX
• 2400mah/9Wh 3.75V Honeywell 1202/1452/1902/1911/1981/3820
• 4600mAh 3.7V/4.2V Honeywell Intermec CN50 CN51

This is a rechargeable Honeywell 7.2V 5200mAh 550053-000 Battery . High quality and long lifetime, this 550053-000 battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for Honeywell 550053-000 Printer have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for Honeywell 550053-000 has been tested and validated on Honeywell systems to ensure the safety for your Honeywell RP4. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

550053-000 Replacement Honeywell 550053-000 7.2V 5200mAh Battery. Buy cheap Honeywell 550053-000 Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for Honeywell 550053-000) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original Honeywell 550053-000 battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

Product Description:

Type :Li-ion
Brand : Honeywell
Voltage : 7.2V
Capacity :5200mAh

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan – thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

550053-000

Compatibile con i seguenti apparecchi :

Honeywell RP4

How to care for your 550053-000 battery.

This is the Replacement Honeywell 550053-000 Battery, You can extend the life of your 550053-000 battery significantly through the proper care and handling of your battery.

• Any new 550053-000 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Printers plugged in after they have been turned off so that the battery has a full charge the next time you use your Printer. It is probably fully charged within 5 hours.
• A brand new 550053-000 Printer battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
• Run on battery power without the AC adapter cord at least once a week to keep the 550053-000 battery cells active and at their peak potential. When your Printer is plugged into the power adapter the battery goes to ‘standby mode’ while your Printer runs directly on electricity from the wall outlet.
• Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
• If your 550053-000 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
• Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the 550053-000 battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Printers, even the earliest models.
• Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your 550053-000 battery.

How can I extend your battery run time?

You can extend your 550053-000 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

• Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
• Turn off your wireless finder if you are not using the internet.
• Remove any devices plugged into your USB ports or other ports.
• Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
• Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
• Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

• 1.62Ah 7.4V Honeywell Intermec PR2 PR3
• 5200mAh 7.2V Honeywell RP4