DJI Mavic-Air 11.55V 2375mAh Replacement Battery for DJI Mavic Air Part 1 Intelligent Flight

This is a rechargeable DJI 11.55V 2375mAh Mavic-Air Battery . High quality and long lifetime, this Mavic-Air battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for DJI Mavic-Air Drone have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for DJI Mavic-Air has been tested and validated on DJI systems to ensure the safety for your DJI Mavic Air Part 1 Intelligent Flight. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

Mavic-Air Replacement DJI Mavic-Air 11.55V 2375mAh Battery. Buy cheap DJI Mavic-Air Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for DJI Mavic-Air) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original DJI Mavic-Air battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

DJI Mavic-Air 11.55V 2375mAh Replacement Battery

Product Description:

Type :Li-ion
Brand : DJI
Voltage : 11.55V
Capacity :2375mAh

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan – thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

Mavic-Air

Compatibile con i seguenti apparecchi :

for DJI Mavic Air Part 1 Intelligent Flight

How to care for your Mavic-Air battery.

This is the Replacement DJI Mavic-Air Battery, You can extend the life of your Mavic-Air battery significantly through the proper care and handling of your battery.

Any new Mavic-Air battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Drones plugged in after they have been turned off so that the battery has a full charge the next time you use your Drone. It is probably fully charged within 5 hours.
A brand new Mavic-Air Drone battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
Run on battery power without the AC adapter cord at least once a week to keep the Mavic-Air battery cells active and at their peak potential. When your Drone is plugged into the power adapter the battery goes to ‘standby mode’ while your Drone runs directly on electricity from the wall outlet.
Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
If your Mavic-Air battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the Mavic-Air battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Drones, even the earliest models.
Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your Mavic-Air battery.

How can I extend your battery run time?

You can extend your Mavic-Air battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
Turn off your wireless finder if you are not using the internet.
Remove any devices plugged into your USB ports or other ports.
Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

DJI BCX202 3.85V 1800mAh Replacement Battery for DJI Osmo Action 3 4

This is a rechargeable DJI 3.85V 1800mAh BCX202 Battery . High quality and long lifetime, this BCX202 battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for DJI BCX202 Drone have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for DJI BCX202 has been tested and validated on DJI systems to ensure the safety for your DJI Osmo Action 3 4. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

BCX202 Replacement DJI BCX202 3.85V 1800mAh Battery. Buy cheap DJI BCX202 Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for DJI BCX202) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original DJI BCX202 battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

DJI BCX202 3.85V 1800mAh Replacement Battery

Product Description:

Type :Li-ion
Brand : DJI
Voltage : 3.85V
Capacity :1800mAh

TOP REASONS TO BUY FROM US

Compatible Part Numbers:

BCX202

Compatibile con i seguenti apparecchi :

for DJI Osmo Action 3 4

How to care for your BCX202 battery.

This is the Replacement DJI BCX202 Battery, You can extend the life of your BCX202 battery significantly through the proper care and handling of your battery.

Any new BCX202 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Drones plugged in after they have been turned off so that the battery has a full charge the next time you use your Drone. It is probably fully charged within 5 hours.
A brand new BCX202 Drone battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
Run on battery power without the AC adapter cord at least once a week to keep the BCX202 battery cells active and at their peak potential. When your Drone is plugged into the power adapter the battery goes to ‘standby mode’ while your Drone runs directly on electricity from the wall outlet.
Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
If your BCX202 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the BCX202 battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Drones, even the earliest models.
Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your BCX202 battery.

How can I extend your battery run time?

You can extend your BCX202 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
Turn off your wireless finder if you are not using the internet.
Remove any devices plugged into your USB ports or other ports.
Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

DJI AB1 3.85V 1300mAh Replacement Battery for DJI Osmo Action

This is a rechargeable DJI 3.85V 1300mAh AB1 Battery . High quality and long lifetime, this AB1 battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for DJI AB1 Camera have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for DJI AB1 has been tested and validated on DJI systems to ensure the safety for your DJI Osmo Action. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

AB1 Replacement DJI AB1 3.85V 1300mAh Battery. Buy cheap DJI AB1 Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for DJI AB1) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original DJI AB1 battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

DJI AB1 3.85V 1300mAh Replacement Battery

Product Description:

Type :Li-ion
Brand : DJI
Voltage : 3.85V
Capacity :1300mAh

TOP REASONS TO BUY FROM US

Compatible Part Numbers:

AB1

Compatibile con i seguenti apparecchi :

DJI Osmo Action

How to care for your AB1 battery.

This is the Replacement DJI AB1 Battery, You can extend the life of your AB1 battery significantly through the proper care and handling of your battery.

Any new AB1 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Cameras plugged in after they have been turned off so that the battery has a full charge the next time you use your Camera. It is probably fully charged within 5 hours.
A brand new AB1 Camera battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
Run on battery power without the AC adapter cord at least once a week to keep the AB1 battery cells active and at their peak potential. When your Camera is plugged into the power adapter the battery goes to ‘standby mode’ while your Camera runs directly on electricity from the wall outlet.
Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
If your AB1 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the AB1 battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Cameras, even the earliest models.
Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your AB1 battery.

How can I extend your battery run time?

You can extend your AB1 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
Turn off your wireless finder if you are not using the internet.
Remove any devices plugged into your USB ports or other ports.
Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

DJI PH4 15.2V 5870mAh Replacement Battery for DJI Phantom 4 Pro Advanced

This is a rechargeable DJI 15.2V 5870mAh PH4 Battery . High quality and long lifetime, this PH4 battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for DJI PH4 METTLER have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for DJI PH4 has been tested and validated on DJI systems to ensure the safety for your DJI Phantom 4 Pro Advanced. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

PH4 Replacement DJI PH4 15.2V 5870mAh Battery. Buy cheap DJI PH4 Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for DJI PH4) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original DJI PH4 battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

DJI PH4 15.2V 5870mAh Replacement Battery

Product Description:

Type :4S LiPo
Brand : DJI
Voltage : 15.2V
Capacity :5870mAh

TOP REASONS TO BUY FROM US

Compatible Part Numbers:

PH4

Compatibile con i seguenti apparecchi :

DJI Phantom 4
DJI Phantom 4 Pro
DJI Phantom 4 Pro V2.0
DJI Phantom 4 Advanced
Net Weight : 468g
Charging Temperature Range: 41° to 104°F (5° to 40°C)
Max Charging Power: 160W

How to care for your PH4 battery.

This is the Replacement DJI PH4 Battery, You can extend the life of your PH4 battery significantly through the proper care and handling of your battery.

Any new PH4 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave METTLERs plugged in after they have been turned off so that the battery has a full charge the next time you use your METTLER. It is probably fully charged within 5 hours.
A brand new PH4 METTLER battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
Run on battery power without the AC adapter cord at least once a week to keep the PH4 battery cells active and at their peak potential. When your METTLER is plugged into the power adapter the battery goes to ‘standby mode’ while your METTLER runs directly on electricity from the wall outlet.
Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
If your PH4 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the PH4 battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in METTLERs, even the earliest models.
Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your PH4 battery.

How can I extend your battery run time?

You can extend your PH4 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
Turn off your wireless finder if you are not using the internet.
Remove any devices plugged into your USB ports or other ports.
Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

DJI JMA2 15.4V 3850mAh Replacement Battery for DJI Mavic 2 Drone

This is a rechargeable DJI 15.4V 3850mAh JMA2 Battery . High quality and long lifetime, this JMA2 battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for DJI JMA2 METTLER have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for DJI JMA2 has been tested and validated on DJI systems to ensure the safety for your DJI Mavic 2 Drone. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

JMA2 Replacement DJI JMA2 15.4V 3850mAh Battery. Buy cheap DJI JMA2 Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for DJI JMA2) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original DJI JMA2 battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

DJI JMA2 15.4V 3850mAh Replacement Battery

Product Description:

Type :Li-Po
Brand : DJI
Voltage : 15.4V
Capacity :3850mAh

TOP REASONS TO BUY FROM US

Compatible Part Numbers:

JMA2

Compatibile con i seguenti apparecchi :

DJI Mavic 2 Drone

How to care for your JMA2 battery.

This is the Replacement DJI JMA2 Battery, You can extend the life of your JMA2 battery significantly through the proper care and handling of your battery.

Any new JMA2 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave METTLERs plugged in after they have been turned off so that the battery has a full charge the next time you use your METTLER. It is probably fully charged within 5 hours.
A brand new JMA2 METTLER battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
Run on battery power without the AC adapter cord at least once a week to keep the JMA2 battery cells active and at their peak potential. When your METTLER is plugged into the power adapter the battery goes to ‘standby mode’ while your METTLER runs directly on electricity from the wall outlet.
Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
If your JMA2 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the JMA2 battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in METTLERs, even the earliest models.
Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your JMA2 battery.

How can I extend your battery run time?

You can extend your JMA2 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
Turn off your wireless finder if you are not using the internet.
Remove any devices plugged into your USB ports or other ports.
Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

DJI BT-YUO1 11.4V 3830mAh Replacement Battery for DJI Mavic Pro Drone

This is a rechargeable DJI 11.4V 3830mAh BT-YUO1 Battery . High quality and long lifetime, this BT-YUO1 battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for DJI BT-YUO1 METTLER have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for DJI BT-YUO1 has been tested and validated on DJI systems to ensure the safety for your DJI Mavic Pro Drone. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

BT-YUO1 Replacement DJI BT-YUO1 11.4V 3830mAh Battery. Buy cheap DJI BT-YUO1 Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for DJI BT-YUO1) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original DJI BT-YUO1 battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

DJI BT-YUO1 11.4V 3830mAh Replacement Battery

Product Description:

Type :Li-ion Polymer
Brand : DJI
Voltage : 11.4V
Capacity :3830mAh

TOP REASONS TO BUY FROM US

Compatible Part Numbers:

BT-YUO1

Compatibile con i seguenti apparecchi :

DJI Mavic Pro Drone

How to care for your BT-YUO1 battery.

This is the Replacement DJI BT-YUO1 Battery, You can extend the life of your BT-YUO1 battery significantly through the proper care and handling of your battery.

Any new BT-YUO1 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave METTLERs plugged in after they have been turned off so that the battery has a full charge the next time you use your METTLER. It is probably fully charged within 5 hours.
A brand new BT-YUO1 METTLER battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
Run on battery power without the AC adapter cord at least once a week to keep the BT-YUO1 battery cells active and at their peak potential. When your METTLER is plugged into the power adapter the battery goes to ‘standby mode’ while your METTLER runs directly on electricity from the wall outlet.
Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
If your BT-YUO1 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the BT-YUO1 battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in METTLERs, even the earliest models.
Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your BT-YUO1 battery.

How can I extend your battery run time?

You can extend your BT-YUO1 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
Turn off your wireless finder if you are not using the internet.
Remove any devices plugged into your USB ports or other ports.
Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

DJI 522365 11.1V 980mAh 10.8Wh Replacement Battery for DJI 522365

This is a rechargeable DJI 11.1V 980mAh 10.8Wh 522365 Battery . High quality and long lifetime, this 522365 battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for DJI 522365 Camera have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for DJI 522365 has been tested and validated on DJI systems to ensure the safety for your DJI 522365. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

522365 Replacement DJI 522365 11.1V 980mAh 10.8Wh Battery. Buy cheap DJI 522365 Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for DJI 522365) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original DJI 522365 battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

DJI 522365 11.1V 980mAh 10.8Wh Replacement Battery

Product Description:

Type :Li-polymer
Brand : DJI
Voltage : 11.1V
Capacity :980mAh 10.8Wh

TOP REASONS TO BUY FROM US

Compatible Part Numbers:

522365

Compatibile con i seguenti apparecchi :

DJI 522365

How to care for your 522365 battery.

This is the Replacement DJI 522365 Battery, You can extend the life of your 522365 battery significantly through the proper care and handling of your battery.

Any new 522365 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Cameras plugged in after they have been turned off so that the battery has a full charge the next time you use your Camera. It is probably fully charged within 5 hours.
A brand new 522365 Camera battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
Run on battery power without the AC adapter cord at least once a week to keep the 522365 battery cells active and at their peak potential. When your Camera is plugged into the power adapter the battery goes to ‘standby mode’ while your Camera runs directly on electricity from the wall outlet.
Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
If your 522365 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the 522365 battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Cameras, even the earliest models.
Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your 522365 battery.

How can I extend your battery run time?

You can extend your 522365 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
Turn off your wireless finder if you are not using the internet.
Remove any devices plugged into your USB ports or other ports.
Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.