Autel VK4770B1PL 3.7V 5050mAh Replacement Battery for Autel MX808/808IM/DS808/808TS

This is a rechargeable Autel 3.7V 5050mAh VK4770B1PL Battery . High quality and long lifetime, this VK4770B1PL battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for Autel VK4770B1PL Tools have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for Autel VK4770B1PL has been tested and validated on Autel systems to ensure the safety for your Autel MX808/808IM/DS808/808TS. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

VK4770B1PL Replacement Autel VK4770B1PL 3.7V 5050mAh Battery. Buy cheap Autel VK4770B1PL Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for Autel VK4770B1PL) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original Autel VK4770B1PL battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

Autel VK4770B1PL 3.7V 5050mAh Replacement Battery

Product Description:

Type :Li-ion
Brand : Autel
Voltage : 3.7V
Capacity :5050mAh

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan – thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

VK4770B1PL

Compatibile con i seguenti apparecchi :

Autel MX808/808IM/DS808/808TS

How to care for your VK4770B1PL battery.

This is the Replacement Autel VK4770B1PL Battery, You can extend the life of your VK4770B1PL battery significantly through the proper care and handling of your battery.

  • Any new VK4770B1PL battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Toolss plugged in after they have been turned off so that the battery has a full charge the next time you use your Tools. It is probably fully charged within 5 hours.
  • A brand new VK4770B1PL Tools battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
  • Run on battery power without the AC adapter cord at least once a week to keep the VK4770B1PL battery cells active and at their peak potential. When your Tools is plugged into the power adapter the battery goes to ‘standby mode’ while your Tools runs directly on electricity from the wall outlet.
  • Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
  • If your VK4770B1PL battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
  • Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the VK4770B1PL battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Toolss, even the earliest models.
  • Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your VK4770B1PL battery.

How can I extend your battery run time?

You can extend your VK4770B1PL battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

  • Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
  • Turn off your wireless finder if you are not using the internet.
  • Remove any devices plugged into your USB ports or other ports.
  • Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
  • Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
  • Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

Autel MDA_2250_770 7.7V 2250mAh Replacement Battery for Autel Robotics EVO Nano Nano+ Drone

This is a rechargeable Autel 7.7V 2250mAh MDA_2250_770 Battery . High quality and long lifetime, this MDA_2250_770 battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for Autel MDA_2250_770 METTLER have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for Autel MDA_2250_770 has been tested and validated on Autel systems to ensure the safety for your Autel Robotics EVO Nano Nano+ Drone. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

MDA_2250_770 Replacement Autel MDA_2250_770 7.7V 2250mAh Battery. Buy cheap Autel MDA_2250_770 Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for Autel MDA_2250_770) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original Autel MDA_2250_770 battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

Autel MDA_2250_770 7.7V 2250mAh Replacement Battery

Product Description:

Type :Li-ion
Brand : Autel
Voltage : 7.7V
Capacity :2250mAh

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan – thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

MDA_2250_770

Compatibile con i seguenti apparecchi :

Autel Robotics EVO Nano Nano+ Drone

How to care for your MDA_2250_770 battery.

This is the Replacement Autel MDA_2250_770 Battery, You can extend the life of your MDA_2250_770 battery significantly through the proper care and handling of your battery.

  • Any new MDA_2250_770 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave METTLERs plugged in after they have been turned off so that the battery has a full charge the next time you use your METTLER. It is probably fully charged within 5 hours.
  • A brand new MDA_2250_770 METTLER battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
  • Run on battery power without the AC adapter cord at least once a week to keep the MDA_2250_770 battery cells active and at their peak potential. When your METTLER is plugged into the power adapter the battery goes to ‘standby mode’ while your METTLER runs directly on electricity from the wall outlet.
  • Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
  • If your MDA_2250_770 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
  • Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the MDA_2250_770 battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in METTLERs, even the earliest models.
  • Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your MDA_2250_770 battery.

How can I extend your battery run time?

You can extend your MDA_2250_770 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

  • Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
  • Turn off your wireless finder if you are not using the internet.
  • Remove any devices plugged into your USB ports or other ports.
  • Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
  • Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
  • Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

Autel MDXM_6175_1113 11.13V 6175mAh Replacement Battery for Autel EVO Lite

This is a rechargeable Autel 11.13V 6175mAh MDXM_6175_1113 Battery . High quality and long lifetime, this MDXM_6175_1113 battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for Autel MDXM_6175_1113 METTLER have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for Autel MDXM_6175_1113 has been tested and validated on Autel systems to ensure the safety for your Autel EVO Lite. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

MDXM_6175_1113 Replacement Autel MDXM_6175_1113 11.13V 6175mAh Battery. Buy cheap Autel MDXM_6175_1113 Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for Autel MDXM_6175_1113) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original Autel MDXM_6175_1113 battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

Autel MDXM_6175_1113 11.13V 6175mAh Replacement Battery

Product Description:

Type :Li-ion
Brand : Autel
Voltage : 11.13V
Capacity :6175mAh

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan – thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

MDXM_6175_1113

Compatibile con i seguenti apparecchi :

Autel EVO Lite

How to care for your MDXM_6175_1113 battery.

This is the Replacement Autel MDXM_6175_1113 Battery, You can extend the life of your MDXM_6175_1113 battery significantly through the proper care and handling of your battery.

  • Any new MDXM_6175_1113 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave METTLERs plugged in after they have been turned off so that the battery has a full charge the next time you use your METTLER. It is probably fully charged within 5 hours.
  • A brand new MDXM_6175_1113 METTLER battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
  • Run on battery power without the AC adapter cord at least once a week to keep the MDXM_6175_1113 battery cells active and at their peak potential. When your METTLER is plugged into the power adapter the battery goes to ‘standby mode’ while your METTLER runs directly on electricity from the wall outlet.
  • Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
  • If your MDXM_6175_1113 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
  • Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the MDXM_6175_1113 battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in METTLERs, even the earliest models.
  • Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your MDXM_6175_1113 battery.

How can I extend your battery run time?

You can extend your MDXM_6175_1113 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

  • Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
  • Turn off your wireless finder if you are not using the internet.
  • Remove any devices plugged into your USB ports or other ports.
  • Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
  • Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
  • Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

Autel MDXM_6175_1113 11.13V 6175mAh Replacement Battery for Autel EVO Lite Intelligent Flight

This is a rechargeable Autel 11.13V 6175mAh MDXM_6175_1113 Battery . High quality and long lifetime, this MDXM_6175_1113 battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for Autel MDXM_6175_1113 METTLER have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for Autel MDXM_6175_1113 has been tested and validated on Autel systems to ensure the safety for your Autel EVO Lite Intelligent Flight. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

MDXM_6175_1113 Replacement Autel MDXM_6175_1113 11.13V 6175mAh Battery. Buy cheap Autel MDXM_6175_1113 Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for Autel MDXM_6175_1113) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original Autel MDXM_6175_1113 battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

Autel MDXM_6175_1113 11.13V 6175mAh Replacement Battery

Product Description:

Type :Li-ion
Brand : Autel
Voltage : 11.13V
Capacity :6175mAh

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan – thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

MDXM_6175_1113

Compatibile con i seguenti apparecchi :

Autel EVO Lite Intelligent Flight

How to care for your MDXM_6175_1113 battery.

This is the Replacement Autel MDXM_6175_1113 Battery, You can extend the life of your MDXM_6175_1113 battery significantly through the proper care and handling of your battery.

  • Any new MDXM_6175_1113 battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave METTLERs plugged in after they have been turned off so that the battery has a full charge the next time you use your METTLER. It is probably fully charged within 5 hours.
  • A brand new MDXM_6175_1113 METTLER battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
  • Run on battery power without the AC adapter cord at least once a week to keep the MDXM_6175_1113 battery cells active and at their peak potential. When your METTLER is plugged into the power adapter the battery goes to ‘standby mode’ while your METTLER runs directly on electricity from the wall outlet.
  • Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
  • If your MDXM_6175_1113 battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
  • Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the MDXM_6175_1113 battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in METTLERs, even the earliest models.
  • Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your MDXM_6175_1113 battery.

How can I extend your battery run time?

You can extend your MDXM_6175_1113 battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

  • Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
  • Turn off your wireless finder if you are not using the internet.
  • Remove any devices plugged into your USB ports or other ports.
  • Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
  • Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
  • Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

Autel VK4770B1PL 3.7V 5050mAh Replacement Battery for Autel MaxiSys MS906BT MS906TS MS906S

This is a rechargeable Autel 3.7V 5050mAh VK4770B1PL Battery . High quality and long lifetime, this VK4770B1PL battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for Autel VK4770B1PL Tools have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for Autel VK4770B1PL has been tested and validated on Autel systems to ensure the safety for your Autel MaxiSys MS906BT MS906TS MS906S. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

VK4770B1PL Replacement Autel VK4770B1PL 3.7V 5050mAh Battery. Buy cheap Autel VK4770B1PL Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for Autel VK4770B1PL) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original Autel VK4770B1PL battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

Autel VK4770B1PL 3.7V 5050mAh Replacement Battery

Product Description:

Type :Li-ion
Brand : Autel
Voltage : 3.7V
Capacity :5050mAh

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan – thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

VK4770B1PL

Compatibile con i seguenti apparecchi :

Autel MaxiSys MS906BT MS906TS MS906S

How to care for your VK4770B1PL battery.

This is the Replacement Autel VK4770B1PL Battery, You can extend the life of your VK4770B1PL battery significantly through the proper care and handling of your battery.

  • Any new VK4770B1PL battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Toolss plugged in after they have been turned off so that the battery has a full charge the next time you use your Tools. It is probably fully charged within 5 hours.
  • A brand new VK4770B1PL Tools battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
  • Run on battery power without the AC adapter cord at least once a week to keep the VK4770B1PL battery cells active and at their peak potential. When your Tools is plugged into the power adapter the battery goes to ‘standby mode’ while your Tools runs directly on electricity from the wall outlet.
  • Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
  • If your VK4770B1PL battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
  • Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the VK4770B1PL battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Toolss, even the earliest models.
  • Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your VK4770B1PL battery.

How can I extend your battery run time?

You can extend your VK4770B1PL battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

  • Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
  • Turn off your wireless finder if you are not using the internet.
  • Remove any devices plugged into your USB ports or other ports.
  • Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
  • Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
  • Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

Autel 515783-4P 3.8V 15000mAh Replacement Battery for Autel MaxiCOM MK908 MK908P

This is a rechargeable Autel 3.8V 15000mAh 515783-4P Battery . High quality and long lifetime, this 515783-4P battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for Autel 515783-4P Tools have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for Autel 515783-4P has been tested and validated on Autel systems to ensure the safety for your Autel MaxiCOM MK908 MK908P. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

515783-4P Replacement Autel 515783-4P 3.8V 15000mAh Battery. Buy cheap Autel 515783-4P Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for Autel 515783-4P) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original Autel 515783-4P battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

Autel 515783-4P 3.8V 15000mAh Replacement Battery

Product Description:

Type :Li-ion
Brand : Autel
Voltage : 3.8V
Capacity :15000mAh

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan – thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

515783-4P

Compatibile con i seguenti apparecchi :

Autel MaxiCOM MK908 MK908P
Autel MaxiSys Pro Elite

How to care for your 515783-4P battery.

This is the Replacement Autel 515783-4P Battery, You can extend the life of your 515783-4P battery significantly through the proper care and handling of your battery.

  • Any new 515783-4P battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Toolss plugged in after they have been turned off so that the battery has a full charge the next time you use your Tools. It is probably fully charged within 5 hours.
  • A brand new 515783-4P Tools battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
  • Run on battery power without the AC adapter cord at least once a week to keep the 515783-4P battery cells active and at their peak potential. When your Tools is plugged into the power adapter the battery goes to ‘standby mode’ while your Tools runs directly on electricity from the wall outlet.
  • Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
  • If your 515783-4P battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
  • Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the 515783-4P battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Toolss, even the earliest models.
  • Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your 515783-4P battery.

How can I extend your battery run time?

You can extend your 515783-4P battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

  • Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
  • Turn off your wireless finder if you are not using the internet.
  • Remove any devices plugged into your USB ports or other ports.
  • Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
  • Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
  • Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari

Autel VK398282PL 3.7V 4.2V 3900mah 14.43Wh Replacement Battery for Autel Maxisys Elite H81225WYQ

This is a rechargeable Autel 3.7V 4.2V 3900mah 14.43Wh VK398282PL Battery . High quality and long lifetime, this VK398282PL battery lets you work seamlessly when you are on the move for business trips or vacations. All our Li-ion replacement batteries for Autel VK398282PL Cell Phone have been tested and proven to match and/or exceed original battery performance and are 100% compatible with Original Manufacturer Specifications. Every piece of our replacement battery for Autel VK398282PL has been tested and validated on Autel systems to ensure the safety for your Autel Maxisys Elite H81225WYQ. Increased capacity extends your workable hours at the office, in meetings or classes, or while traveling.

VK398282PL Replacement Autel VK398282PL 3.7V 4.2V 3900mah 14.43Wh Battery. Buy cheap Autel VK398282PL Replacement Battery from batteriestore.co.uk now. We have a strict testing process to ensure that your ordered products (like this battery for Autel VK398282PL) are functionally correct before they are packed and sent to you. And before placing an order please make sure that your old original Autel VK398282PL battery’s shape is same to our batteries’ images as below. Free shipping and one year warranty!

Autel VK398282PL 3.7V 4.2V 3900mah 14.43Wh Replacement Battery

Product Description:

Type :Li-ion
Brand : Autel
Voltage : 3.7V 4.2V
Capacity :3900mah 14.43Wh

TOP REASONS TO BUY FROM US

✔ Quality replacement battery with high Capacity
✔ Longer lifespan – thanks to modern Lithium technology without memory effect.
✔ Guaranteed safety: Protected against Short-circuits, Overheating and Overvoltage
✔ Each cell is separately tested in order to ensure professional standards are met.
✔ 100% compatible in replacing your original battery

Compatible Part Numbers:

VK398282PL

Compatibile con i seguenti apparecchi :

Autel Maxisys Elite H81225WYQ

How to care for your VK398282PL battery.

This is the Replacement Autel VK398282PL Battery, You can extend the life of your VK398282PL battery significantly through the proper care and handling of your battery.

  • Any new VK398282PL battery should first be fully charged by leaving it plugged in overnight. Once a computer battery is fully charged it will no longer accept any more power. It is a common practice to leave Cell Phones plugged in after they have been turned off so that the battery has a full charge the next time you use your Cell Phone. It is probably fully charged within 5 hours.
  • A brand new VK398282PL Cell Phone battery is in a weakened condition since it has not been conditioned yet. Condition and break in your new battery by performing 5 partial discharge and recharge cycles the first week you receive your new battery.
  • Run on battery power without the AC adapter cord at least once a week to keep the VK398282PL battery cells active and at their peak potential. When your Cell Phone is plugged into the power adapter the battery goes to ‘standby mode’ while your Cell Phone runs directly on electricity from the wall outlet.
  • Even though your battery indicates it is fully charged, your battery will return to a weakened state again in a few months if it does not get some exercise through partial discharge and recharge cycles while running on battery power alone.
  • If your VK398282PL battery has not been actively used 2 months or more, condition your battery again with 5 partial discharge & recharge cycles to increase the batteries capacity and run time.
  • Don’t run your battery all the way to empty. Your battery will have a longer service life if it receives shallow discharge and recharge cycles. Research has shown that the useful life of the battery will be much longer if you begin to recharge the battery any time before reaching 20% of the remaining power capacity. Recharging the VK398282PL battery even after 10 minutes will not reduce the battery’s life span as lithium batteries do not have the memory effect which was found in older NiCad battery technology. NiCad batteries have never been used in Cell Phones, even the earliest models.
  • Never run your battery below the 2% critically low warning point. If your battery is run below this point it may not have enough energy to even recharge. This may effectively ‘kill’ your VK398282PL battery.

How can I extend your battery run time?

You can extend your VK398282PL battery run time by minimizing the power drain on your battery. A 3 cell battery will run approximately 2 to 2-1/2 hours when the battery is new. Even longer times can be achieved by minimizing the power consumption of your laptop. Here are the top ways to reduce your power consumption.

  • Avoid using the CD or DVD drive as the motor consumes a fair amount of power.
  • Turn off your wireless finder if you are not using the internet.
  • Remove any devices plugged into your USB ports or other ports.
  • Close out programs you are not using. By minimizing the load on your CPU, sometimes you can avoid having the cooling fan turn to its high speed mode.
  • Increase your memory to 4 Gigabytes. This creates less work for your hard drive. Data is temporarily written to your hard drive when your memory is not sufficient to hold all the data on the many pages you may be accessing.
  • Reduce the brightness of your laptop screen. This is the number one drain on your battery by far.

Prodotti popolari